Language: English line Русский язык
Products

Stationary Concrete Batching Plant

Mini Concrete Batching Plant

  • 1.Excellent manufacturing team with experience of over 36 years.
    2.All can be customized to meet your needs&boost productivity.
    3.Passed CE&ISO9001:2008 quality attestation.
    4.Long-term cooperated transport company ensure the timely and safe delivery.
    5.One-stop service save your precious time.
  • INQUIRY

Model

HZS25

HZS35

HZS50

HZS75

Global 

parameter

Maximum productivity (m3/h)

25

35

50

75

Discharging height (m)

1.5–3.8

1.6–3.8

4.2

4.2

Working cycle time(s)

72

72

72

72

Outline dimension(mm)

11693×13060×

17245

12922×13000×

17245

15689×12500×

18704

17608×12500×

18704

Total power (kw)

50

75

88

110

Mixer

Model

JS500

JS750

JS1000

JS1500

Batcher

Model

PLD800

PLD1200

PLD1600

PLD2400

Pneumatic 

system

Air compressor

1.0–7

1.0–7

1.5–7

1.8–7

Discharge pressure(MPa)

0.8

0.8

0.8

0.8

Displacement (m3/min)

1.67

1.67

1.67

1.67

Motor power

5.5

5.5

7.5

11

Measurement 

system

Aggregate weighing accuracy

±2%

±2%

±2%

±2%

Cement weighing accuracy

±1%

±1%

±1%

±1%

Water weighing accuracy

±1%

±1%

±1%

±1%

Additive weighing accuracy

±1%

±1%

±1%

±1%


    Mini Concrete Batching Plant is one of the small-sized series batching plant.It is full-automatic concrete mixing plant which is composed by feeding, batching, mixing, electrical control and steel structure components.It’s suitable for small-scale construction projects, precast yard and commercial concrete companies.
     
    XINFENG provides the following advantages to users:
    - Quick and easy installation (only 2 day) 
    - Cost effective sea and land transportation 
    - Possibility of installation on a confined space (12x17 meters)
    - Quick and easy relocation
    - Flexibility in the configuration
    - Minimum foundation cost (only flat concrete surface is adequate for installation)
    - Easy maintenance and low operating costs
    - High production performance with optimized automation system


     




    1. It is PC+PLC control which can vividly display the production process on the screen so that the operator can monitor whole process all the time.

    2. Scale board and mixing blades are made of wear resistant alloy special shaft end seal and longer service life.

    3. Screw conveyor is a new type of transporting equipment which use rotary screw vane to push material continuously in closed housing with round section.

    4. The silo can be used to store cement coal ash and other kinds of powder as a main part of concrete batching plant.


    1. Installation
    Installation site should be plain and well-grounded. The pithead should be higher than ground to prevent the water inflow.
    Lift the mixer with lifting device and install four supporting legs connecting angle inclined strut ladder and the downward track. Then place the mixer in the appropriate place of the pit.
    2. Inspection and preparation before test
    Check if the connection of the motor and electric element is steady.
    Check connecting bolts between two parts(especially the moving parts) and ensure they are firm. If not tight them up in time.
    Check if there are sundries stuck in mixing canister and track rack.
    3. No-load test
    Start mixing motor. At the same time the running direction of two mixing shafts should be same with indicating direction of the signs . If there is any difference change the power connection.
    4. Over-load test
    Shut down the discharge door and lift the hopper after feeding. Insure that the hopper can run steadily and stop on the track freely. If there is slipping you should put the hopper into the pit bottom then adjust the big nut in brake motor.

    1. Focus on the maintenance of quick-wear parts and reserve appropriate spare parts.
    2. When the machine is on maintenance adjustment or cleaning cut off the total power switch and hang a warning sign.
    3. Contact with local power supply departments and require them to supply reliable electric power . 
    4. There must be an experienced electrician who is responsible for the daily maintenance of electrical equipment specially.
    5. If the plant installed is taller than the surrounding buildings or equipment the lightning protection facilities should be collocated.
    6. All the safety signs shall be inspected at least once every six months. If there is any damage deformation color fading etc. the signs should be repaired or replaced in time.

Share to :
GET QUOTATION
If you are interested in these products, please leave your message,then,the relevent staff will contact you quickly . (Note: Please fill in your correct information)! Please send all your requests and proposals to [email protected].
Name:
Tel:
Country:
E-mail:
Inquiry:

Product Catalog

LATEST NEWS



Contact Us

Tel: +86 15603907208

Email: [email protected]

Add: 200 meters east at the intersection of Longjiang Road and Huaiyang Road,Shangjie District,Zhengzhou City,Henan province,China.

  • Follow Us:
  • facebook
  • youtube
  • twitter
  • google
  • linkedin

WhatsApp
Email
Message
Inquiry XINFENG