1.  The function of the switch on the column, dial to "active" position, press the controller on the launch switch, all the operation of the program will automatically control their own operation.

 

2.  The whole process is completed after the active suspension, in the operation of the project for half-way shutdown, you can press the stop button and then re-start.

 

The performance of the problem is marked with a weight after the calibration can show the correct value, after unloading the number is not zero, clear and then load the weight of the larger changes, but see the sensor resistance value in the normal scale, and the appearance of no problem.

 

Analysis of factors may be: transport with a fixed scale frame angle iron is not removed; indenter and pressure plate at the card; scale body and the outside interference; 3 sensor models do not match; weighing material partial load.